Kryefaqja/ Fakulteti i Inxhinierisë Mekanike/ Stafi akademik/ Prof. Ramë Likaj
Ramë Likaj
Prof.

Ramë Likaj

Profesor i rregullt

Fakulteti i Inxhinierisë Mekanike

Email [email protected]
Mesimdhenia Publikimet

Mësimdhënia (22)

Baçelor
Viti 1

Bazat e menaxhmentit

Semestri i parë (I), Semestri i dytë (II)
Viti 1

Mekanika teknike I

Semestri i parë (I), Semestri i dytë (II)
Viti 1

Statistika inxhinierike

Semestri i parë (I)
Viti 1

Teoria e prodhimit dhe hyrje në organizim të ndërmarrjes

Semestri i dytë (II)
Viti 2

Bazat e menaxhmentit

Semestri i tretë (III)
Viti 2

Ekonomika e komunikacionit

Semestri i tretë (III)
Viti 2

Kërkimet operacionale në komunikacion

Semestri i katërt (IV)
Viti 2

Matematika e aplikuar me statistikë

Semestri i tretë (III)
Viti 2

Statistika inxhinierike

Semestri i tretë (III)
Viti 3

BAZA E TË DHËNAVE

Semestri i gjashtë (VI)
Viti 3

Bazat e teknikës së rregullimit

Semestri i pestë (V), Semestri i gjashtë (VI)
Viti 3

Menaxhimi i operacioneve

Semestri i gjashtë (VI)
Viti 3

Menaxhimi industrial

Semestri i pestë (V)
Viti 3

Organizimi dhe ekonomika e komunikacionit

Semestri i pestë (V), Semestri i gjashtë (VI)
Viti 3

Statistika inxhinierike në komunikacion

Semestri i gjashtë (VI)
Viti 4

BAZAT E TË DHËNAVE

Semestri i shtatë (VII)
Master
Viti 1

Dinamika jolineare e sistemeve mekanike

Semestri i dytë (II)
Viti 1

Kërkimet operacionale

Semestri i parë (I)
Viti 1

Kërkimet operacionale në industri

Semestri i parë (I)
Viti 1

Menaxhimi i prodhimtarisë

Semestri i parë (I)
Viti 2

MOPSHH

Semestri i tretë (III)
Doktoraturë
Viti 1

Aplikim i TI në Kërkime Shkencore

Semestri i parë (I)

Publikimet (39)

2025

Automated Robotic Arm for Object Detection and Classification

Proceedings of the Mediterranean Conference on Embedded Computing (MECO)
DOI: 10.1109/MECO66322.2025.11049290 ↗
2025

Enhancing cost efficiency in manufacturing through 3c an excel based solution

Proceeding of 34th International Scientific and Technical Conference Automation of Discrete Production Engineering 2025
DOI: 10.53656/adpe-2025.01 ↗
2025

Enhancing cost efficiency in manufacturing through 3C: an excel-based solution

в International Scientific and Technical Conference Automation of Discrete Production Engineering 2025
Lexo më shumë ↗
2025

Real-Time Swing-up of a Linear Inverted Pendulum Using Reinforcement Learning

Mechanics
DOI: 10.5755/j02.mech.39202 ↗
2025

Utilizing linear quadratic regulator and model predictive control for optimizing the suspension of a quarter car vehicle in response to road excitation

Journal of Theoretical and Applied Mechanics
DOI: 10.15632/jtam-pl/196293 ↗
2021

Control Theory Application for Swing Up and Stabilisation of Rotating Inverted Pendulum

Symmetry
DOI: 10.3390/SYM13081491 ↗
2021

PROFESSIONAL DEVELOPMENT IN KOSOVO - RESEARCH OF TRAINING PROGRAMS AND TESTS

Pedagogika - Pedagogy
DOI: 10.53656/PED2021-7.10 ↗
2020

Analysis of the Stability, Control and Implementation of Real Parameters of the Robot Walking

Advances in Intelligent Systems and Computing
DOI: 10.1007/978-3-030-29513-4_68 ↗
2019

Dynamic Walking Experiments for Humanoid Robot

Advances in Intelligent Systems and Computing
DOI: 10.1007/978-3-030-01054-6_60 ↗
2018

Application genetics algorithm for finding shortest path in seven cities

International Journal of Civil Engineering and Technology
Lexo më shumë ↗
2018

Dynamic modelling and analyzing of a walking of humanoid robot

Strojnicky Casopis
DOI: 10.2478/scjme-2018-0027 ↗
2018

Mathematical model for velocity calculation of three types of vehicles in the case of pedestrian crash

Strojnicky Casopis
DOI: 10.2478/scjme-2018-0029 ↗
2018

Optimisation and control of vehicle suspension using linear quadratic Gaussian control

Strojnicky Casopis
DOI: 10.2478/scjme-2018-0006 ↗
2017

Automatic design of technological process of forging

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Dynamic modeling and simulation of the autopilot by using fuzzy logic

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Impact of angle determined by upper bumper ends and the front edge of the engine bonnet of vehicle profile in the throw distance of child

International Journal of Civil Engineering and Technology
Lexo më shumë ↗
2017

Kinematic model of the seven-link biped robot

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Modeling of Biped robot Archie

INTERNATIONAL CONFERENCE ON CONTROL, ARTIFICIAL INTELLIGENCE, ROBOTICS & OPTIMIZATION (ICCAIRO)
DOI: 10.1109/ICCAIRO.2017.12 ↗
2017

Modelling, simulation and the automation of a production warehouse as a key component in cim systems

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Path finding for a mobile robot using fuzzy and genetic algorithms

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Pedestrian crash model for vehicle speed calculation at road accident

International Journal of Civil Engineering and Technology
Lexo më shumë ↗
2017

Six-bar linkage mechanism through the contour method

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Spatial design (3D) of the nominal conveying ability of toothed belts with parabolic profile (HPPD+) based on constructive parameters

International Journal of Mechanical Engineering and Technology
Lexo më shumë ↗
2017

Vehicle speed determination in case of road accident by software method and comparing of results with the mathematical model

Strojnicky Casopis
DOI: 10.1515/scjme-2017-0017 ↗
2016

Application of Fuzzy Logic Controller for obstacle detection and avoidance on real autonomous mobile robot

Mediterranean Conference on Embedded Computing (MECO)
DOI: 10.1109/MECO.2016.7525740 ↗
2016

Modelling and Analysis of Nominal Conveying Ability for the Toothed Belt with STD Profile

IFAC-PapersOnLine
DOI: 10.1016/J.IFACOL.2016.11.059 ↗
2016

Optimal design and analysis of quarter vehicle suspension system by using matlab

Annals of DAAAM and Proceedings of the International DAAAM Symposium
DOI: 10.2507/27th.daaam.proceedings.012 ↗
2016

Trajectory Planning and Inverse Kinematics Solver for Real Biped Robot with 10 DOF-s

IFAC-PapersOnLine
DOI: 10.1016/J.IFACOL.2016.11.108 ↗
2015

Propulsion Effect Analysis of 3Dof Robot under Gravity

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION,
DOI: 10.1016/J.PROENG.2015.01.359 ↗
2013

Application of graph theory to find optimal paths for the transportation problem

IFAC Proceedings Volumes (IFAC-PapersOnline)
DOI: 10.3182/20130606-3-XK-4037.00031 ↗
2013

Kinematics and dynamics modelling of the biped robot

IFAC Proceedings Volumes (IFAC-PapersOnline)
DOI: 10.3182/20130606-3-XK-4037.00032 ↗
2013

Modeling and control of a humanoid robot

e & i Elektrotechnik und Informationstechnik
DOI: 10.1007/S00502-013-0133-5 ↗
2013

Optimization of Flexible Assembly Systems for Electrical Motors

ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: COMPETITIVE MANUFACTURING FOR INNOVATIVE PRODUCTS AND SERVICES, AMPS 2012, PT I
DOI: 10.1007/978-3-642-40352-1_60 ↗
2013

Synthesis of Cam mechanism based on given program

IFAC Proceedings Volumes (IFAC-PapersOnline)
DOI: 10.3182/20130606-3-XK-4037.00044 ↗
2012

Possible experimental method to determine the suspension parameters in a simplified model of a passenger car

International Journal of Automotive Technology
DOI: 10.1007/S12239-012-0059-7 ↗
2010

Fuzzy logic control and 3D simulation of road vehicle

Annals of DAAAM and Proceedings of the International DAAAM Symposium
Lexo më shumë ↗
2010

Modelling and simulation of road vehicle

IFAC Proceedings Volumes (IFAC-PapersOnline)
Lexo më shumë ↗
2006

Increasing and decreasing of dimension factor by angles for central gear of cylindrical hyperbolical planetary transmitter

Annals of DAAAM and Proceedings of the International DAAAM Symposium
Lexo më shumë ↗
2006

Optimalisation of transmission ratio for the M-190E gear box

Annals of DAAAM and Proceedings of the International DAAAM Symposium
Lexo më shumë ↗
Te dhenat baze sinkronizohen nga sistemi SEMS · Sinkronizimi i fundit: 13.06.2026 01:01